Next, the foundation on which the ceramic tile is going to be put on needs to be assessed. There are certain foundations which are not suitable for ceramic tile flooring installation. They are cushioned vinyl flooring, any kind of particle boards, plywood, OSB (Oriented Strand Board), tongue and groove planking and hardwood floors. Concrete is a suitable foundation for ceramic tile flooring installation.

If the bathroom is in a foundation home, plywood may be the sub flooring and one will have no choice but to install the tile flooring on it. If that is the case, then the choice is to put a membrane between the ceramic tile and the plywood which will decrease the likelihood of moisture getting into the plywood.

After that membrane is applied and dried, use a latex thinset bonding material applied between the dried membrane and the tile.

Assuming it is the bathroom which is to be re-floored with the ceramic tile flooring, in addition to the above flooring which need to be treated, the trim molding, the toilet, and the toilet gasket will need removal. Remember to shut off the water before toilet removal and the wax gasket will need to be replaced. Installation of the toilet bowl is the reverse of removal.

They will add to the height of the floor, so any door thresholds will have to be removed and replaced later. The bathroom door may need to be trimmed to clear the new height of the floor.

If you are going to be covering vinyl flooring, have a piece of the vinyl flooring tested for asbestos. If it does not contain asbestos, it is recommended the vinyl is sanded to make the latex modified thinset bond easier to the vinyl. If the vinyl is asbestos refer to the pamphlet provided by the EPA titled “Asbestos in Your Home”.

Installing them directly to concrete, will require application of thinset and placing the ceramic tile on it. Assuming there is no paint or other treatment on the surface of the concrete. If the concrete floor does have paint on the surface, that will need to be removed or the surface roughed so the thinset will bond to the paint. If the floor surface is not perfectly level, you will need to use a concrete mix to level the work area before beginning to lay the ceramic tile flooring. If concrete was needed to level the surface, you will need to allow the concrete to cure 24 hours before applying the thinset.

Thinset dries pretty quickly, so once you begin to lay the ceramic tile you have to stay with it through to the end of the job or the thinset. Plan ahead and don’t mix so much thinset that it dries in the bucket before you use it.

The three most common floor surfaces one may want to cover with a ceramic tile are concrete, plywood and vinyl. The latter two are not recommended to be used as foundations for ceramic tile flooring installation, but can be used with proper steps taken to insure the thinset will bond the ceramic tile to the floor. One needs to remember about the dangers of asbestos in older homes. Other than that, the job is fairly straight forward.

David has been writing articles for nearly 2 years. Come visit his latest website that discusses some great ideas on home renovating
products such as the best ceramic tile flooring and some great kitchen tile flooring
ideas that can be used for kitchens of all shapes and sizes to add some great features to the inside of the house.

Article Source: http://EzineArticles.com/?expert=David_Patullo

These paint ceramic floor tiles are produced by painting them manually, by hand, to your liking. This can be done for you by people who specialized in that. You can try and look up for some of those tiles in stores that are specialized for ceramic tiles in general. Or you can try and get in touch with people who are making them through the Internet.

These paint ceramic floor tiles, that are painted by hand, often follow certain motives, like a field of flowers, or some other nature theme, or they can portray something totally different. The only thing that links all of these tiles is that they are original. Perhaps, you can even say they are a work of art. Of course, they are more expensive than usual tiles. Manual work necessary for creating them always come at a cost.

These paint ceramic floor tiles can take various positions on the floor where they are placed. They can just take the border tiles, but sometimes they can be placed in the middle of the floor, and form some sort of a mosaic there.

These paint ceramic floor tiles are usually created by coloring white glazed tiles with various paint.

To paint ceramic floor tiles one should probably have artistic talents, for as we mentioned, most people who are looking for these tiles are regarding them as certain works of art. Also, they really want to decorate their rooms with them, not just merely place tiles in them. These paint ceramic floor tiles can be used for decorating various rooms in ones home. They are, however, most often used in living rooms, children bedrooms, and recreational areas. And if you are a person looking to buy some of these tiles you too should have in mind that they are a work of art, and unique. Therefore you should not expect to get them whenever you want, as it is unlikely that the artist who created them will create a similar work.

Apart from the aesthetic reasons, these tiles should be considered for their other benefits like the fact that they are easy to maintain, simply due to the fact that they are ceramic tiles. Also, they are highly resistant to moist, and and various stains.

To conclude, if you want a functional, yet artistic addition to your home had painted ceramic tiles could just the thing for you.

David has been writing articles for nearly 2 years. Come visit his latest website that discusses some great ideas on home renovating products such as the best ceramic tile flooring and some great garage tile flooring ideas that can be used for the garage just to add that extra something to a room that is usually forgotten.

Article Source: http://EzineArticles.com/?expert=David_Patullo

Inception

As soon as human being started out constructing dwellings and civic facilities, he made up his mind to invigorate the space somewhat. Ceramic painting turned into an effective technique to embellish the interior of a house. It was employed on patio walls, roofs, floorings, inside murals and even on outside walls. This particular theme of beautification is so ancient that ceramic tile prints have been recovered at the remains of Babylon, prehistoric Egypt and Greece. The most antique artworks were obtained in Babylon and are reckoned to be 4,000 years old.

Evolution of Techniques

Hardly any practices were ever acknowledged all through the past record of ceramic painting. They were communicated by word of mouth from father to child or from master to pupil. It is apparent that the tiles themselves were manually constructed of clay. The most former tiles were built of clay bricks that were crushed and formed by hand. Subsequently, they were dried out by the sunlight or baked. Afterwards, tools made of wood were employed to give shape to the clay. After the physical structure was formed, the tile was blazed in a kiln. If the tile was not having a shiny coating, it was blazed only once. If it was glazed, then it was blazed two times in the furnace. In the period from 1840 to 1849, artists started to recreate the art on ceramic tiles and made bricks with a dust pressing technique. This technique involved squeezing the brick between two metal blocks.

Enhancing Techniques & Color

Tiles without shiny coating were left uncolored and continued with the shade of the clay. A very old method of adornment was sgraffito. Sgraffito is a practical method where the body is wrapped up with thin potter’s clay and then knocked off to shape a figure. A lucid glaze made by pounding white lead, flint (a form of silica), porcelain clay and china stone simultaneously revealed the coloring of the clay or of the paint used over the clay. This shiny finish permitted artists to paint freely on the clay and rendered the paint capable to remain on the clay. The early Greeks heavily contributed to a manner of ceramic painting known as mosaic. This technique implies cutting off painted tile pieces, then assembling them to make an image or design.

Forms of Decoration

Three forms of embellishment were applied on ceramic. The foremost form of design, used in olden periods, was the tile image. Every brick comprised a piece of an image, and then bricks were set up as one to create one big picture constituted of tiles. The bricks were normally dyed in color and shiny. Single motifs were said to be tiles with one separated design colored upon them. Ceramic was also found with paints of geometric figures.

Want to decorate your bedroom, bathroom, or home? Consider hanging a beautifully ceramic tile art on your wall or ceramic numbers in front of your home. Visit our online store for more details.

Article Source: http://EzineArticles.com/?expert=JM_Chuong

Knowing the kind of subfloor you’ll be installing ceramic tile flooring over is important. There are three main types of subfloors you might encounter: Vinyl, plywood, and concrete floors. Installing ceramic tile flooring directly to your vinyl or linoleum subfloor surfaces is greatly discouraged. One, it may contain asbestos fibers; and two, vinyl flooring is not a solid as good ol’ concrete flooring. When installing ceramic tile on vinyl, experts would recommend rough-sanding, or scarifying, the vinyl floor surface first so your tiling mortar has good grip to set on.

For plywood subfloors, be sure that the wood is at least 1 and 1/8 inches thick and is supported by an equally strong underlayment. Otherwise, your ceramic tiles will dislodge easily, or worse, break and need replacing. Concrete floors are the most ideal subfloor surface to work with. But before you can start installing ceramic tile flooring over it, it must be cleaned thoroughly. For dust and other debris, sweep and then mop your concrete subfloor surface, and allow it to dry completely. Smooth concrete surfaces must be rough sanded just like vinyl floors to allow the tiling mortar some grip.

You can begin window-shopping and canvassing for ceramic tiles once you have the space or area estimated. Ceramic floor tiles come in a variety of prices, shapes, textures and styles. Pick a tile type that’s within your price range and ask to see it in what a palette of colors. The most common ceramic tile size is one square foot. But ceramic tiles may come in a wide array of sizes; from one inch, to two feet.

Prices can vary according to tile type. Natural stone tiles made from granite or slate may sell for two dollars per square foot. Glazed ceramic tiles run from a dollar to twenty dollars per square foot, while unglazed quarry tiles may average around $2 per square foot.

An important thing to remember is to use ceramic tiles with a slightly rough textured surface when tiling the bathroom. This is so you won’t encounter accidents on a floor that’s always wet. Smooth glazed ceramic tiles, especially, are ideal for kitchen or back porch flooring. But you shouldn’t use them bathroom floors, as they can be treacherous when wet.

It’s also important to get the right equipment and tools for the project. You can buy most of the tools and materials you’ll need at you neighborhood hardware store, or home center. For equipment that might over your budget like tile cutters, try asking your local home center or tool rental yard if they have the tools you need for rental. Basic ceramic tiling tools include A pair of safety glasses, heavy leather gloves, tile spacers, notched trowel, a handheld tile cutter, and a pair of tile nippers. Have some sandpaper handy for smoothing out cut edges. Sponges and clean dry rags will come in handy for cleaning and wiping off excess mortar material and grout lining from your newly-finished ceramic tiling floor.

Of course, you can always consult a professional if you are hesitant over how to start installing ceramic tile on your floor. From choosing the right tiles and color, to tearing out existing ceramic tile floors without damaging the subfloor, to installing ceramic tile that will last you a lifetime, a home improvement professional will be able to help you with information, at the very least, or assist you when you start installing ceramic tile.

Discover how to install ceramic floor tile. Grab your guide on installing ceramic tile floors in simple steps.

Article Source: http://EzineArticles.com/?expert=Rashel_Dan

Most tiling jobs start with a well-prepared subfloor. As you learn more about how to lay ceramic floor tile, you will find out about the three general types of floors that tile installers may often work with. Such information will help you alot along the way.

Generally, you will encounter three types of subfloors: Vinyl, plywood, and the concrete floors. Installing ceramic tile directly to vinyl or linoleum floors (or subfloor surfaces) should be avoided at all cost. Your vinyl or linoleum flooring may contain asbestos fibers and should be tested first before you try removing it. If your vinyl floor covering does not contain asbestos fibers, a general recommendation on how to lay ceramic floor tile is to rough-sand, or scarify, the vinyl floor surface to provide your tiling mortar a better grip. Use a latex modified thinset mortar to install your ceramic tiles over your vinyl subfloor.

Working over plywood subfloors can be very tricky, as well. Like vinyl floor surfaces, it is not advisable to install your ceramic tiles directly on to your plywood floor surface. Plywood flooring usually has a smooth surface, and easily warps when exposed to heat or moisture. Be sure that the wood is at least 1 and 1/8 inches thick and is reinforced and supported by an equally strong underlayment. Otherwise, your ceramic tiles will dislodge easily, or worse, break and need replacing. Plywood panel edges must be installed about one-fourth of an inch away from perimeter walls and door jambs, and fixtures and cabinetry. These are expansion gaps and should not be bridged with tiling mortar. To prevent moisture from damaging the plywood subfloor, use a waterproofing sealant or caulk over your plywood subsurface.

Concrete floors are the most ideal subfloor surface to work with. But before you start tiling over the subfloor surface, it must be cleaned thoroughly. Paint, adhesives, fillers or levelers, sealers, and chemically treated cement substrates are unsuitable surfaces fpr ceramic tile installations. Remove these by using non-chemical methods. For dust and other debris, sweep and then mop your concrete subfloor surface using only clean water. Allow the surface completely before you start working on it. Generally, smooth concrete surfaces are difficult to work with as the tiling mortar may not grip and hold. Consequently, your ceramic floor tiles may be in danger in dislodging. Smooth concrete surfaces must be rough sanded, scarified, or etched to allow the tiling mortar some grip.

Another important aspect about how to lay ceramic floor tile is to always check for cracks and debris. Repair as many of the cracks as you can. If you see cracks that are too large to repair, replace the floor section where they are found with new concrete. Concrete may need to set (or dry) for at least twenty-four hours before you can start tiling over it. Lastly, get out your carpenter’s level and check for any dips or humps on the concrete subfloor surface. If you find any, you may use a cement-based floor level to fill in the dips and smoothen over the humps. This will help to keep your finished ceramic tile floor level and minimize dislodging, or tile breakage.

Let it dry or set properly. This is the key step you need to keep in mind about how to lay ceramic floor tile flooring. There are three setting periods: The first is right after you have placed your ceramic tiles with thin set mortar and bonded them to your subfloor. The second is after after putting in your tiling grout (before putting on the sealant). These setting periods last overnight, at the very least, to twenty-four hours, at the most. Your sealant has dried, you are done!

So when you work on your own ceramic tile project, always remember how to lay ceramic floor tile properly by knowing how to work with your subfloor surfaces. Learning how to lay ceramic floor tile is also both a great way both to learn a new hobby, and a home improvement skill. Just remember to keep a safe working environment, not to rush things (especially during setting periods), and try to work with at buddy. Better yet, get your friends over and help.

Learn how to lay ceramic floor tile on your bathroom or kitchen. Get your ceramic tile installation instructions online.

Article Source: http://EzineArticles.com/?expert=Rashel_Dan

1. Finish. Ceramic tiles come in a number of finishes. You can get glazed or unglazed tiles. So, how do you know which is best for you? Let’s take a look at some of the pros and cons of each. Glazed tile has the benefit of being more water resistant than unglazed. This is a great feature for someone with small children as they tend to spill often, and thus, water resistant flooring becomes a must. Also glazed ceramic tile is easier to clean than unglazed tile, which with children is also a plus. So, what are the cons? Well, for one, glazed ceramic tile tends to be more slippery when wet. This could be a hazard, but do not worry, this does not eliminate the pros of glazed tile from your options. What you can do, is use a glazed ceramic tile with a non-slip feature or material.

2. Size: Depending on where in your home you want the tile, and the look you are going for, will determine what size of ceramic tile is best for you. Ceramic tile come in a variety of sizes, from about 1/4″ square, to 12″ x 12″ squares and in some instances are even larger. The size is definatley a matter of choice, but for floors, a popular choice is 6″ x 6″ up to 12″ x 12″ sizes. Larger tiles work best for larger areas. For areas that may get more water, and thus become slippery, smaller tiles are a great choice as the greater number of grout lines help make the tile less slippery.

3. Shape: the shape of your ceramic tile is going to make a huge difference in how easy it is to lay, etc. So, shapes include square, rectangular, diamond, hexagon, octagon, triangular, round, and a variety of several of the previous options, or you can also have custom shapes made up for you, but this increases your costs. If you want to go for the custom look without the cost, then use more than one shape and even color of ceramic tile.

4. Color: Color is the decorators favorite option, and when it comes to ceramic tiles you aren’t limited by your choices of colors, you can find ceramic tiles in just about any color you can think of, as well as the natural hues of slate, granite, marble, and other natural stone tiles. So, to choose the best color for you home, you should realize that while some of the brighter blues, and more vibrant colors may be very attractive to you as you shop, if you stay with the neutral colors, or natural tones, the ceramic tile will be easier to match to your other flooring in your home. Also, because ceramic tiles are pretty much one of the very most durable flooring types you can find, and you will not likely need to replace it for a number of lifetimes (although you may need to regrout occassionaly), staying neutral means staying up to date. Instead of colored tiles try colored accent rugs and other colored décor. Also it is best to choose your tile first and then match the color of carpeting, vinyl flooring or other materials to the tiles, rather than the other way around.

5. Grout: The grout you choose to cement your tiles in with is going to make a difference in how your tiles look. You can use colored grouts, neutral grouts, really fine, or really course grouts. For easiest cleaning, choose grout that is a neutral color, and stay away from white white unless you want to use a lot of bleach. A gray or tan grout will hide dirt better, and leave the focus on the tiles themselves not the material holding them together.

HomeBuildingRemodeling.com is your source for top quality home building, remodeling and home decorating information. For free articles delivered daily by email, visit HomeBuildingRemodeling.com and enter your name and email under the Free Home Building and Remodeling Updates section.

Article Source: http://EzineArticles.com/?expert=Dan_Calderwood

Though installation of ceramic tile is not a complicated task, it does involve some detailed steps such as preparing tile surface, laying out the wall, applying adhesive or mortar, setting tile, and caulking. Ceramic tile can be installed on any surface such as drywall, plaster, cement block, and even in existing ceramic tile. The surface for the tiles should be flat, smooth, and free of dust and debris. Additionally, if there is any loose paint or crack on the surface, it should be scraped off and patched with some water-proof substance.

Laying out the wall is perhaps the most important step in the installation process. It includes determining the level line, planning starting point, and checking whether any irregularity has been caused by fixtures like kitchen cabinets and tubs. The next step is to evenly apply ceramic wall adhesive on the surface using a notch trowel. Pro-mastic and pro-flex platinum are the most commonly used adhesives for ceramic tiles.

After having applied the adhesives, carefully place the tiles one by one on the surface. Equipments such as tile spacers can be used to give adequate space between the tiles. Sometimes, for fixing tiles on the edges cutting may be required. A masonry drill can be used for the cutting purposes. For making curved cuts, micro cutter or wet saw can be used.

Before allowing the tiles to settle, they should be leveled using a hammer. When tiles are settled, fill in the gap between the tiles with grout. Seal all grout joint to avoid grout porosity. The final step in ceramic tile installation process is caulking. This is primarily done to prevent water from seeping into bathtub edges or corners of the wall.

Ceramic Tile provides detailed information on Ceramic Tile, Ceramic Floor Tile, Ceramic Tile Design, Installing Ceramic Tile and more. Ceramic Tile is affiliated with Mosaic Arts.

Article Source: http://EzineArticles.com/?expert=Ken_Marlborough

Two of the best rooms for ceramic tile flooring are the bathroom and kitchen. This is because these rooms are very susceptible to moisture, which can be very damaging for most flooring types. Ceramic tile flooring is very favorable for these rooms, however, because they can stand up well to the moisture and the fluctuating temperatures without damage. This is why many homeowners choose to use ceramic tile flooring for their homes.

If you live near the ocean, then you may see ceramic tile flooring in many homes in your area. This is because the air is naturally moist when you live in a coastal area, which makes it very important to consider this when choosing flooring for your home. The warm and humid climate of most coastal areas can be very damaging to some flooring options, unlike ceramic tile, which is why many homeowners choose to use ceramic tile flooring all over their home to help keep it looking beautiful and welcoming.

If you are concerned about the cold months with ceramic tile flooring, because you do not want to walk on cold floors, then you do not have to worry any longer. You can use warm rugs to help cover the ceramic tiles to give it more cushion and warmth during the cold, winter months. It will also add a touch of color to your home, as well as texture, to your home.

If your ceramic tile flooring is exposed to a great deal of temperature fluctuations or humidity, then they may form mold that you will have to remove with a special cleaning solution. This solution can be found in home improvement stores, your grocery store, and even in department stores. Finding the right cleaning solutions for your ceramic tile flooring is important to make sure that you keep it looking beautiful for many years to come.

Vacuuming the ceramic tiles and mopping them is a simple way to keep them looking beautiful and clean. They are very durable, but you want to be sure that you do not use harsh products on the tiles. If you have a cracked tile, you will have to replace the entire tile, rather than just repairing the broken one.

Professional installation is very important to make sure that your ceramic tiles will last as long as possible. Proper installation can help them to withstand fluctuating temperatures and humidity, as well as normal wear and tear, so that you can have a beautiful ceramic tile floor for a long time. Being cheap on installation will cost you more in the long run, so be sure you use experienced installers.

The collaborator Peter Wilson is especially interested in information corresponding to router table inserts. You might find out more about his abstracts on router table insert and router table top over at http://www.insidewoodworking.com

Article Source: http://EzineArticles.com/?expert=Peter_I._Wilson

Ceramic Tile Flooring for Offices and Homes

The most common place that you find tiles floors are in bathrooms, both at home and in your office. This is because water can cause other floors to warp and cause problems. Another popular room where ceramic tiles are used is in the kitchen. Ceramic floors are used in this room for the same reason as the bathroom, water and moisture can damage other floors.

Use Ceramic Flooring Throughout your House

It’s normal to find ceramic flooring throughout homes and offices if they are located by the sea. This is because the water can cause problems to other types of flooring. When living by the sea, the floors have to live up with much more. Ceramic tiles are also useful in reducing the temperature in your house during the summer months.

If you live in a cold location and still want to use ceramic tiles then you should make sure you have plenty of rugs to put down and make it warmer. Alternatively you could consider installing under floor heating before installing the ceramic tiles. Using one of these methods can keep your home snug and cozy even during the cold winter months.

Maintaining Ceramic Tile Flooring

Don’t assume that ceramic tiles are completely maintenance free; yes it’s true that they are very durable but they do require a lot of regular work. If ceramic tiles are exposed to moisture then a layer of mold can quickly cover the tiles, you will need to clean this off with a special solution which can be purchased from many shops, including your local grocery store. You can even buy solutions which can be sprayed onto the tiles at night and then wiped off in the morning.

Another way to keep your ceramic tiles in good condition is to vacuum them, and mop them on a regular basis. Ceramic tiles flooring are very long lasting and durable; however you should be careful not to use any abrasive substances on the tiles as this can damage the surface of your tile.

If you accidentally crack one of your tiles then your only option is to take the tile up and replace it with a new one.

Ceramic tiles are quite difficult to install, it is important that they are installed properly so that they last as long as they should. If they are not installed properly then water or humidity can loosen the adhesive which could cause the tile to come away. Regular ceramic tiles should last a very long time as long as you treat them properly.

The essayist Clinton Maxwell is passionate about issues corresponding to installing bamboo floor and how to install bamboo flooring. You might discover his contributions on how to install bamboo flooring and benefits of bamboo flooring over at http://www.insidewoodworking.com .

Article Source: http://EzineArticles.com/?expert=Clinton_N._Maxwell

Tile counter tops will offer a variety of style, finish and textures. Many motifs, patterns and layout can be created for an elegant look. You can opt for a different style, with tiles made of natural materials like granite, for example. Many types of ceramic tile can now mimic more expensive materials without giving you all the trouble of the extensive maintenance procedures associated with wood or real stone, for example. Porcelain and glazed ceramic can also resist scratching and staining, which is a considerable benefit for counter-tops and floors. Of course there are a couple of limitations for ceramic tile in the kitchen. For example, the grout used to fill the gaps between the tiles can become porous over time and be a breeding ground for germs. Hygiene and maintenance will then become important to keep your kitchen as clean as possible. Ceramic tile cleaning is not very time-consuming or complicated, as long as it is done often. Another con of ceramic tiles is thatthey don’t handle heavy impact well, often resulting in cracks and chips.

Ceramic tiles also come in variety of sizes and shapes. This affords another option to add elegance and style to your kitchen and will determine the cost of tile. Mixing colors, styles and finishes can really enhance the look of your kitchen. It is important to keep it matching to cabinets and cup-boards, though. It is also best to leave the installation of ceramic tiles to a professional, as breakage can happen during handling and installation, and the tiles needs to be properly laid and leveled for a sleek look. Nicely installed ceramic flooring or counter-tops can provide great re-sale value as it is resistant to wear and tear, delaminating, discoloring or water damage. It will positively increase the value of your home. Unlike carpeting, ceramic tiles are also anti-allergenic which provides a great advantage for people who suffer from reactions to dust mites and pet dander.

Ceramic tiles have been and will certainly remain one of the most popular materials for kitchen counter-tops, floors and backsplashes, due to its incredible durability. The style versatility it offers and of course, the affordability of the material often makes it an optimum choice for new homes and renovations. A ceramic tiled kitchen will increase the value of your home, adding to its overall elegance and style with a long-lasting finish.

When you need kitchen ceramic tile in Wichita Kansas, count on All Seasons Construction. All Seasons Construction has over 30 years experience in all aspects of home improvement and construction in Wichita, KS including patio covers, awnings, siding, replacement windows, kitchens, baths, and room additions.

Article Source: http://EzineArticles.com/?expert=Jeff_Hund