Next, the foundation on which the ceramic tile is going to be put on needs to be assessed. There are certain foundations which are not suitable for ceramic tile flooring installation. They are cushioned vinyl flooring, any kind of particle boards, plywood, OSB (Oriented Strand Board), tongue and groove planking and hardwood floors. Concrete is a suitable foundation for ceramic tile flooring installation.

If the bathroom is in a foundation home, plywood may be the sub flooring and one will have no choice but to install the tile flooring on it. If that is the case, then the choice is to put a membrane between the ceramic tile and the plywood which will decrease the likelihood of moisture getting into the plywood.

After that membrane is applied and dried, use a latex thinset bonding material applied between the dried membrane and the tile.

Assuming it is the bathroom which is to be re-floored with the ceramic tile flooring, in addition to the above flooring which need to be treated, the trim molding, the toilet, and the toilet gasket will need removal. Remember to shut off the water before toilet removal and the wax gasket will need to be replaced. Installation of the toilet bowl is the reverse of removal.

They will add to the height of the floor, so any door thresholds will have to be removed and replaced later. The bathroom door may need to be trimmed to clear the new height of the floor.

If you are going to be covering vinyl flooring, have a piece of the vinyl flooring tested for asbestos. If it does not contain asbestos, it is recommended the vinyl is sanded to make the latex modified thinset bond easier to the vinyl. If the vinyl is asbestos refer to the pamphlet provided by the EPA titled “Asbestos in Your Home”.

Installing them directly to concrete, will require application of thinset and placing the ceramic tile on it. Assuming there is no paint or other treatment on the surface of the concrete. If the concrete floor does have paint on the surface, that will need to be removed or the surface roughed so the thinset will bond to the paint. If the floor surface is not perfectly level, you will need to use a concrete mix to level the work area before beginning to lay the ceramic tile flooring. If concrete was needed to level the surface, you will need to allow the concrete to cure 24 hours before applying the thinset.

Thinset dries pretty quickly, so once you begin to lay the ceramic tile you have to stay with it through to the end of the job or the thinset. Plan ahead and don’t mix so much thinset that it dries in the bucket before you use it.

The three most common floor surfaces one may want to cover with a ceramic tile are concrete, plywood and vinyl. The latter two are not recommended to be used as foundations for ceramic tile flooring installation, but can be used with proper steps taken to insure the thinset will bond the ceramic tile to the floor. One needs to remember about the dangers of asbestos in older homes. Other than that, the job is fairly straight forward.

David has been writing articles for nearly 2 years. Come visit his latest website that discusses some great ideas on home renovating
products such as the best ceramic tile flooring and some great kitchen tile flooring
ideas that can be used for kitchens of all shapes and sizes to add some great features to the inside of the house.

Article Source: http://EzineArticles.com/?expert=David_Patullo

These paint ceramic floor tiles are produced by painting them manually, by hand, to your liking. This can be done for you by people who specialized in that. You can try and look up for some of those tiles in stores that are specialized for ceramic tiles in general. Or you can try and get in touch with people who are making them through the Internet.

These paint ceramic floor tiles, that are painted by hand, often follow certain motives, like a field of flowers, or some other nature theme, or they can portray something totally different. The only thing that links all of these tiles is that they are original. Perhaps, you can even say they are a work of art. Of course, they are more expensive than usual tiles. Manual work necessary for creating them always come at a cost.

These paint ceramic floor tiles can take various positions on the floor where they are placed. They can just take the border tiles, but sometimes they can be placed in the middle of the floor, and form some sort of a mosaic there.

These paint ceramic floor tiles are usually created by coloring white glazed tiles with various paint.

To paint ceramic floor tiles one should probably have artistic talents, for as we mentioned, most people who are looking for these tiles are regarding them as certain works of art. Also, they really want to decorate their rooms with them, not just merely place tiles in them. These paint ceramic floor tiles can be used for decorating various rooms in ones home. They are, however, most often used in living rooms, children bedrooms, and recreational areas. And if you are a person looking to buy some of these tiles you too should have in mind that they are a work of art, and unique. Therefore you should not expect to get them whenever you want, as it is unlikely that the artist who created them will create a similar work.

Apart from the aesthetic reasons, these tiles should be considered for their other benefits like the fact that they are easy to maintain, simply due to the fact that they are ceramic tiles. Also, they are highly resistant to moist, and and various stains.

To conclude, if you want a functional, yet artistic addition to your home had painted ceramic tiles could just the thing for you.

David has been writing articles for nearly 2 years. Come visit his latest website that discusses some great ideas on home renovating products such as the best ceramic tile flooring and some great garage tile flooring ideas that can be used for the garage just to add that extra something to a room that is usually forgotten.

Article Source: http://EzineArticles.com/?expert=David_Patullo

Inception

As soon as human being started out constructing dwellings and civic facilities, he made up his mind to invigorate the space somewhat. Ceramic painting turned into an effective technique to embellish the interior of a house. It was employed on patio walls, roofs, floorings, inside murals and even on outside walls. This particular theme of beautification is so ancient that ceramic tile prints have been recovered at the remains of Babylon, prehistoric Egypt and Greece. The most antique artworks were obtained in Babylon and are reckoned to be 4,000 years old.

Evolution of Techniques

Hardly any practices were ever acknowledged all through the past record of ceramic painting. They were communicated by word of mouth from father to child or from master to pupil. It is apparent that the tiles themselves were manually constructed of clay. The most former tiles were built of clay bricks that were crushed and formed by hand. Subsequently, they were dried out by the sunlight or baked. Afterwards, tools made of wood were employed to give shape to the clay. After the physical structure was formed, the tile was blazed in a kiln. If the tile was not having a shiny coating, it was blazed only once. If it was glazed, then it was blazed two times in the furnace. In the period from 1840 to 1849, artists started to recreate the art on ceramic tiles and made bricks with a dust pressing technique. This technique involved squeezing the brick between two metal blocks.

Enhancing Techniques & Color

Tiles without shiny coating were left uncolored and continued with the shade of the clay. A very old method of adornment was sgraffito. Sgraffito is a practical method where the body is wrapped up with thin potter’s clay and then knocked off to shape a figure. A lucid glaze made by pounding white lead, flint (a form of silica), porcelain clay and china stone simultaneously revealed the coloring of the clay or of the paint used over the clay. This shiny finish permitted artists to paint freely on the clay and rendered the paint capable to remain on the clay. The early Greeks heavily contributed to a manner of ceramic painting known as mosaic. This technique implies cutting off painted tile pieces, then assembling them to make an image or design.

Forms of Decoration

Three forms of embellishment were applied on ceramic. The foremost form of design, used in olden periods, was the tile image. Every brick comprised a piece of an image, and then bricks were set up as one to create one big picture constituted of tiles. The bricks were normally dyed in color and shiny. Single motifs were said to be tiles with one separated design colored upon them. Ceramic was also found with paints of geometric figures.

Want to decorate your bedroom, bathroom, or home? Consider hanging a beautifully ceramic tile art on your wall or ceramic numbers in front of your home. Visit our online store for more details.

Article Source: http://EzineArticles.com/?expert=JM_Chuong

Ceramic tile makes up for a flexible choice in terms of design and function. Products come in a very wide variety of styles from stripes, geometric, floral, to delightfully complicated mosaics or just anything that could easily capture your imagination. It offers a good selection when it comes to sizes and shapes and so much more when it comes to color-coming in every color of the rainbow and almost all shades in between. Extraordinarily, it comes in various sets of qualities making it ideal to use as roofing, wall tile, countertop or decorative tilework material.

Other than versatility, ceramic tile also poses a whole lot of other benefits including:

* Resistance to abrasion. When choosing materials for your home improvement, one important factor to look into is its suitability for its intended application and the functions of the room. One good thing about ceramic tile is that it can serve its purposes efficiently whether for heavy, moderate or light use.

* Slip resistance. Generally, an unglazed ceramic tile holds better slip resistance than that of glazed ones, making them better choices for outdoor use. But today, both glazed and unglazed types are manufactured featuring abrasive grits on the surface.

* Hygiene. Where cleanliness is essential, ceramic tile can be integrated. Having characteristics of efficiently repelling fumes, liquids, odors, other unpleasant elements and practically all compounds that could result to stains. This choice promotes good hygiene and easy clean up.

* Longevity. With an eye for quality products and religiously sticking to proper maintenance, any area in your home laid with ceramic tile can last a lifetime and even more. Because of this, it is crucial that you choose products carefully- picking one that offers an appeal that you would not easily get tired of.

* Permanent colors. Unlike other materials, glazed ceramic tile can effectively serve its purposes whether it is put on the kitchen, living room, bathroom, bedroom and even public spaces that connect to the outdoors. No matter how much sunlight this is exposed to, the colors will stay as vivid.

* Water, Frost and Fire Proof. Especially if you are considering ceramic tile for outdoor use, choose varieties that have moisture absorption of less than 3%. This feature also makes up for greater resistance to frost which prevents tiles from freezing and cracking. Ceramic tiles are completely fire resistant. Though extreme heat can affect glaze color, this option gives your home added protection.

Eugene Makeev uses his skills and expertise to help home owners in Brooklyn, Long Island, Queens, Manhattan, and Staten Island avoid pitfalls by matching their needs with prescreened tile contractors New York.

Visit us for more remodeling articles.

Article Source: http://EzineArticles.com/?expert=Eugene_R._Makeev

Ceramic floor tiles are slightly thicker than wall tiles, they come in a variety of designs, shapes,colours and patterns, and are available either glazed or unglazed. As with any job preparation is key to getting it right, this is no different with laying ceramic floor tile. If you are laying ceramic floor tile over a concrete floor surface, you need to first repair and fill in any holes, clean any grease off the surface and sweep leaving the floor free of dust before applying a sealant.

When laying ceramic floor tiles you will need to use an adhesive recommended by the manufacturer of the tile, this will usually be a bituminous cement based or solvent based adhesive. A trowel or spreader to apply the adhesive, spacers and a tile cutter or saw. If tiling over floorboards screw loose floorboards to the joists and then cover with 12mm exterior grade plywood, make sure the screws are countersunk and then seal the plywood surface.

How many tiles will I need? you can work this out by using the tile size to find out how many tiles there are in a row, then add up the number of rows, count the tiles you will have to cut as a whole one and then allow another row for any broken tiles you might have.

The final part of your preparation when laying ceramic floor tiles is deciding which grout to use. Waterproof grout is available in many colours, and white is always a popular choice but bear in mind this tends to show up dirty marks easily. Now we are ready to start. The first thing I recommend before you start laying ceramic floor tile is that you plan your tile layout on paper, in an awkward shaped room your tiles should follow a main feature such as a run of kitchen units.

Ok now we can get down to the real business of laying ceramic floor tiles. Firstly we need to find a starting point, this can be done by snapping chalk lines from the centre of each wall across to the opposite wall, where these two lines cross will be the position of your key starting tile. Dry-lay the key tile and tiles to two walls, reposition these tiles along the chalk line to prevent the cut tiles at both ends being less than a third of the full size. Remove the tiles and fix guide battens along the chalk lines, then spread the adhesive within the area using a notched trowel.

Start laying ceramic floor tiles onto the adhesive using a twisting motion, then place spacers between tiles to keep gaps even, at this point only lay whole tiles. Remove any excess adhesive. Now we can move onto the other sections of the floor and repeat the process. When this has been completed it is usually best to leave it overnight to dry. Next using a heavy duty tile cutter, cut and lay the edge tiles. Finally we can now grout the floor using a rubber bladed spreader, pressing the grout into the gaps with a grouting tool, and then wiping off the excess with a wet cloth before it sets.

My name is Christian Roberts and you can visit my site http://www.hisolutions.blogspot.com To find out and learn a whole lot more about laying ceramic floor tile click here and before you begin the job, see how straightforward laying floor tiles can be.

Article Source: http://EzineArticles.com/?expert=Christian_Roberts

Decorative ceramic tile is used to decorate walls and floors. Walls can be decorated with these tiles in the place of wallpaper. Fireplaces and showers can be decorated with decorated tiles which increase the value of the house. Interior designers are using decorative tiles in their designs, and homeowners are learning to express their beliefs and personalities through the tiles they choose. Most tiles are exposed to dust, and they will fade over time if they are not cleaned regularly, especially those with painted images or designs. It is important to have clean ceramic tile because it keeps the family healthy and happy. In the end, it also saves on money and time, since well-groomed tiles will last longer and will need to be replaced less frequently, saving on cost, labor and annoyance.

A ceramic tile can be cleaned with a sponge and detergent. Ceramic tiles have a smooth surface which makes them easy to clean. Day-to-day cleaning can involve a vacuum, since light upkeep throughout the week will result in consistently clean ceramic tile. During installation, tiles should be placed so that there are no gaps left between the individual tiles. Otherwise, the tile can leak, and seepage will occur in the spaces left behind. Seepage is a common problem in many households, and the tiles are also harder to clean, as dirt and dust will build up in the cracks and cannot be reached with a vacuum or sponge. Quickly, clean ceramic tile will become a hopeless dream.

Clean ceramic tile is also safer tile. Not only does cleaning help to extend the life and quality of tiles, it can help to extend the life of the family. Dust and other chemicals can make families sick, and cleaning tile helps to remove at least some of the bacteria and disease from the home. If oil or any other petroleum product spills on the tile floor, it should be cleaned up right away, as the tiles can become very slippery and dangerous to walk on. Clean ceramic tile saves a family from accidents, as long as it is dried adequately after cleaning. You can read more free advice on ceramic tiles at http://www.CeramicTilesGuide.com

Ceramic tile cleaners are designed specifically to clean ceramic tile, especially the surface, and are available in liquid form. Cleaner is also available as a disinfectants Care should be taken while cleaning tiles, as chemicals, no matter how harmless, can be dangerous if used improperly. Tiles form an integral part of the home, and for the family, clean ceramic tile is only in its best interest.

Article by Ashley Goad at http://www.CeramicTilesGuide.com For more great free information on everything you should know about ceramic tiles visit => ceramic tile kitchens and discount ceramic floor tiles.

Article Source: http://EzineArticles.com/?expert=Ashley_Goad

Bathroom ceramic tile in your home is both beautiful and very practical. Nothing else can match the beauty and the great variety of colors, textures, designs and shapes possible with tile construction. Especially in bathrooms, ceramic tile can’t be matched as a durable and useful surface.

Tile On Counter Tops

Tile bathroom counter tops are very practical. Many times porcelain tile is used on counter tops. Porcelain tile is tile that is fired under certain conditions. The surface or finish of porcelain tile is very slick and glass-like. Because of that slick finish, porcelain tile wipes off very easily, which is great for clean-up in a bathroom. Porcelain tile comes in many types of trim shapes, suitable for trimming edges and trays in bathrooms.

But other kinds of tiles are used on bathroom counter tops. Granite and marble tiles are good on counter tops. Even floor tiles are fine. Just think about how you will trim the tile around the edges.

An epoxy grout is great for bathroom counter tops. Epoxy grout is stain proof and waterproof, perfect for use anywhere in a bathroom.

Ceramic Tile on Bathroom Floors

Bathroom floors get wet, making ceramic tile a perfect floor covering choice. Make sure to select a tile with some texture so it won’t be slick. Installation goes under the commode edge. The commode must be removed to install the tile. This is a good time to replace the commode mounting hardware and seal. Again, epoxy grout is perfect for the floor grout since it’s waterproof.

Tile On Walls

Bathroom walls are a great place for tile. Especially in a steamy shower environment, The moisture will not bother the ceramic tile wall at all. A ceramic tile wall is virtually a no maintenance surface. And porcelain is ultra easy to clean.

Ceramic Tile On Tub And Shower Surrounds

Maintaining many kinds of tub surrounds is a constant battle. But not ceramic tile on the tub surround. Just a simple wipe down occasionally is all that’s required. Also built in trays and racks can be fitted to the ceramic tile tub surround to make it both beautiful and useful.

Ceramic Tile Showers

Ceramic tile showers can be installed quickly and at reasonable costs. The standard method of building ceramic tile showers includes building a masonry shower floor over a waterproof membrane, called a shower pan liner. The shower floor will last a long time with very little maintenance. The only real maintenance required is to keep the grout sealed to prevent deterioration of the grout.

Do It Yourself Bathroom Tile

It is very possible for a handy person to learn to do bathroom ceramic tile installation. There are just a few steps to the process and a few tools to acquire if you wish to do tile installation yourself.

There are some tricks to installing ceramic tile, but nothing that you can’t learn. Just like many other home improvement projects, a handy person can do a professional ceramic tile installation job. You may be slower than a pro, but your finished work can be just as good. Maybe even better, since you can take all the time you need and you aren’t in a hurry. Installing ceramic tile is just done in steps. If you understand the steps, you can do a great job.

You can enjoy the satisfaction of bathroom ceramic tile installation done right. Plus save some money and not have strangers in your house!

Are you ready to enjoy bathroom ceramic tile in your home. I’ve enjoyed ceramic tile in my bathroom most of my life and it’s an affordable luxury.

Visit InstallingCeramicTile.Net and get started on your bathroom tile project.

Al Bullington enjoys bathroom ceramic tile in the rural South.

Article Source: http://EzineArticles.com/?expert=Al_Bullington

Bathroom ceramic tile is a good choice because of its durability, resistance to dampness and its ease of cleaning. Bathroom ceramic tile can range from inexpensive to very expensive, and it is a classic choice for a bathroom.

Ceramic tile is formed from clay, shale or porcelain, then fired at very high temperatures until it hardens. The higher the temperature and the more times the tile is fired, the harder and less porous the tile becomes. Tile for bathrooms comes in many shapes, sizes, patterns and textures. Tile shapes can be squares, rectangles, hexagons and octagons. Accent tiles are narrow-shaped and diamond-shaped pieces.

Tile can be glazed or unglazed. Unglazed bathroom ceramic tile is simply baked pieces of clay whose colors are determined by the mineral content of the clay. These tiles are the workhorses of the industry. Generally thicker and denser than glazed tiles, they include products such as quarry tiles and porcelains. The toughness of unglazed tiles make them ideally suited (but not limited to) heavy commercial installations.

Here are tips for using ceramic tile in a bathroom:

1. Consider using unglazed bathroom ceramic tile if you want to have the most slip-resistant surface. The rugged surface texture and matte finish of these tiles give them good slip-resistant qualities for use in wet areas. If you buy and install unglazed tiles for your bathroom floor, they will need to be cleaned frequently because they absorb oil and stains quite easily. Examples of unglazed tiles are quarry tiles, porcelain tiles and terra-cotta tiles which can be handmade or machine-made.

2. If you are using a white or cream ceramic tile for your bathroom, using a different color grout like “blue” will give your bathroom a more dramatic look.

3. Make sure you apply sealers to grout lines in areas of heavy wear, like countertops. Sealers will protect and preserve grout colors.

4. For a floor surface that is virtually stainproof, use glazed bathroom ceramic tile. Glazed bathroom ceramic tile is made the same way as unglazed tile, but it undergoes an additional process. A glass layer is applied, then subjected to tremendous heat in a kiln. This process liquefies the glass and fuses it to the bisque. Glazes offer an unlimited array of beautiful colors, textures and designs and create a surface that is practically stainproof and very wearable. While most glazed tiles are for light residential to medium commercial traffic uses, recent technological advances produce glazed tiles that are hard and durable enough to stand up to the most demanding commercial applications.

5. To make your bathroom floor more exciting, add patterns, floor accents or small splashes of color using ceramic custom tile pieces. Or consider using large rectangular decorative sections placed in the middle of the floor. Custom ceramic tile or art tile can be found with Victorian, Mexican or Moorish styled designs and they can also be used as bathroom backsplashes, tub surrounds and in showers.

6. For countertops and backsplashes, make sure the tiles are glazed and can withstand household cleaners. And backsplashes are a great place to add decorative tile.

7. To tie it all together, pay attention to the available bathroom accessories. Towel bars, ceramic soap dishes, toothbrush/cup holders — you’ll want these to blend in well with your bathroom ceramic tile.

With all the choices that await you today, have fun as you select the styles, colors, patterns and sizes of bathroom ceramic tile and related details for your bathroom. You’ll want your bathroom to be a fun, cozy room to spend time in, and bathroom ceramic tile can help create that kind of atmosphere. Bathroom ceramic tile is decorative and lasting — use it in the ways you want for having the bathroom that you can enjoy every day.

David Buster is VP of InfoSearch Publishing and webmaster of http://www.yourdreamloghome.com – learn more about bathroom tile ideas and bathroom layout, lighting, storage, bathroom vanities, small bathrooms, childrens bathrooms and more.

Article Source: http://EzineArticles.com/?expert=David_Buster

Cost

Ceramic tiles for bathroom counter tops are available in many sizes, shapes, thicknesses, colors, textures, and strengths all at various prices. You can spend as little as $.99 a sq foot to as high as $45.00 a sq foot for designer tiles.

Color/Design

Ceramic tiles are a porous material thereby requiring a sealant or in other words a glaze. A natural glaze application would allow for the tile to gain a hard surface but would also leave the tile with its natural hue. In order for a tile to have a particular color, pigments are then added to the glaze and once fired, become an intentionally colorful tile.

The options truly are endless for tiles with respect to color, texture and style. The difficult part is really deciding which one best fits with your space!

* Glass tiles can be a beautiful addition to your bathroom counter tops as well. Remember that glass tiles are clear with color pigment inside the tile themselves. They change color with light, grout and backing. Durability

With respect to durability, all tiles are ranked using a Roman numeral grading system of I to V. Today the internet and discount tile supply stores are a fantastic option for getting great prices on tiles, but beware that not all packages will be properly labeled to distinguish a strength grade.

In bathroom counters it is vitally important to have a tile with at least a grade III strength rating. With respect to durability, a grade III or higher glazed ceramic tile is an excellent solution for counter tops in any Bathroom for many reasons: It is very strong and can last almost as long as any other counter top surface product on the market today if installed properly and well maintained.

Scratch resistance – Glazed ceramic tiles rank highly among similar materials for scratch resistance.

Strength – Although the strength of glazed ceramic tiles are ranked in grades and can be very strong with respect to wear and scratching, these counter tops can be more susceptible to damage than laminate and solid surface. Very heavy objects could eventually create enough pressure over time to crack tiles and should something heavy fall onto the counter, breakage will most likely occur. It is possible to fix broken tiles, however this process can also damage surrounding tiles so diligence is needed when doing so.

Fire resistance – Glazed ceramic tiles are fire resistant and will not burn or emit toxic fumes.

Water resistance – Glazed ceramic tiles are moisture resistant with an absorption rate of 3% to 7%. If water is left pooling on a ceramic surface for a prolonged period of time, damage can be expected. Proper cleaning and vigilance will keep tiles looking like new.

Maintenance – Cleaning spills quickly and occasionally cleaning the grout can prolong the life of your ceramic tile counter top.

Construction/Installation

It is not necessary to have Ceramic tile counter tops professionally installed, make sure you follow these few rules and you’ll be fine.

1. Do your research and seek out credible advice. There are several fantastic websites designed to help you install your ceramic tile counter tops and be sure to visit your local building centers where some will host free lessons on tiling. The more information and advice you can receive the less mistakes may be made therefore saving you money!

2. Choosing a color or style of bathroom counter top tile is an important consideration, but so is your grout! Be sure to get the right grout and don’t forget to choose the right grout color as well. Be aware of the look you are trying to achieve and realize that your choice of grout color could dramatically change the overall look of your bathroom counter for better and for worse! Space between your tiles is also something very important to consider. Greater effect and style can be created in something as simple as tile spacing.

3. Another tile to consider installing is un-manufactured tile or hand-made tiles. One very important thing to note about using and installing these tiles is that each tile is generally different. This tile can add rustic beauty to your space but beware of inconsistencies; your end result may not resemble your intention!

Environment/Health

Ceramic tiles are an excellent choice for bathroom counter tops in that they are very easy to clean. These tiles are non-conductive and therefore do not attract dust and dirt. From a green perspective ceramic tiles are ideal. Created from natural ingredients they are not harmful to landfills and post consumer recycled glass is a great option if you are so inclined.

In conclusion, Ceramic tiles are Very sexy and allow for much creativity in your bathroom design. Ceramic tiles are very prevalent in Mexican and Spanish design for a reason. They are durable and versatile and you can incorporate your ceramic tile counter tops into your back splash, match them to your floors; create a great space with unlimited possibilities!

The Oops Factor

Ceramic & Glass counter tops can be a scary bathroom choice due to breakage and maintenance! Although easy to clean, tough on spills, heat resistant and sanitary, these counter tops are problematic for damage! The tiles are also subject to breaking when abused so be careful with heavy items and try to always clean spills quickly to avoid staining your grout. With proper care you can have a great relationship with ceramic tile counter tops in your bathroom for years to come.

Michael Kyle is Co-founder of The Sexy Bathroom.Com and The Sexy Kitchen.com Two great web sites dedicated to Kitchen & Bathroom Design, Planning and Materials as well as a great resource for design photo’s and entertaining.

Article Source: http://EzineArticles.com/?expert=Michael_Kyle